Results for “opening”
12 articles found
- Doors and windows…ed by walls: they move with the wall, cut a clean opening in 2D and 3D, and can't float in space. Before you start At least one wall drawn. Steps Press D for a…
- IFC (BIM) export…rved walls are short straight pieces within 1 mm. Openings (IfcOpeningElement): one per door, window and opening, cut from its wall. Niches are exported as rece…
- Measure a room by hand…; if not, you'll see it's slightly skewed. Locate openings: for each door and window measure from the nearest corner to the edge of the opening, then the openin…
- Export formats…D tools DXF 2D geometry with named layers (walls, openings, furniture, labels, dimensions) CAD software XLSX Room, door & window and furniture schedules, plus a…
- Niches: recesses in a wall…built into one face of a wall. Unlike a window or opening it doesn't go through: some wall is always left behind it. Before you start A wall at least as wide as…
- Plan a renovation: existing, proposed and demolition…Phase → Demolish. It shows dashed in red, and its openings are flagged too. Add the new work. Draw new walls, an island or a wider opening. New items default to…
- Your first floor plan in 15 minutes…t fit inside one wall without overlapping another opening. Shorten the opening or move it along the wall. 3D is blank or slow. See Browser support and performan…
- Dimensions and units…your plan. Before you start Select a wall, room, opening or item so the inspector shows its dimensions. Formats you can type You type Means 12 ft 6 in 12 feet…
- Draw a floor plan: outside walls first, then rooms…nect it. "… has no way in": a room has no door or opening. Click Add a door. "A door or window is in the part you're cutting." Move or delete it first, then cut…
- Glossary…omment on the projects they're invited to. Hosted opening A door, window or passage that belongs to a wall and moves with it. Inspector The panel on the right o…
- Learn from a sample home…on problems "Use this sample" asks me to sign up. Opening a sample in the editor needs an account so your copy can be saved. My copy doesn't match the latest sa…
- Open to below: stairwells and double-height spaces…floor and select the room (draw walls around the opening first if needed). In the inspector, under Floor, turn on Open to floor below. The lowest floor can't b…