Results for “thickness”
8 articles found
- Draw rooms and walls…omatically. With a wall selected, set its length, thickness, height and material in the inspector. Walls can run at any angle, and any wall can be curved: drag…
- Niches: recesses in a wall…th into the wall. It must be less than the wall's thickness. The inspector shows how much wall stays behind it. Recessed into Side A or Side B, or Flip side. Dr…
- Glossary…An imaginary line through the middle of a wall's thickness. Gross area is measured to centrelines. Clear (inside) dimension The distance between the inner face…
- Measure a room by hand…om and type the inside dimensions. Our walls have thickness, so set wall thickness first (e.g. 4½″ / 115 mm for interior partitions) and use inside dimensions i…
- Draw a floor plan: outside walls first, then rooms…e wall and more. The inspector also has one-click thickness presets. Move around the plan Press H or click the hand button (bottom right) and drag to move aroun…
- Elevations and sections…dden behind others are left out of the file. Slab thicknesses in sections are nominal (150 mm on the ground, 200 mm between floors unless your floor heights lea…
- IFC (BIM) export…cSlab): one per room with a floor, at the nominal thickness used in sections. Rooms open to below have none. Rooms (IfcSpace): name, clear interior outline and…
- Schedules and estimate spreadsheet (XLSX)…pe, style, width, height, sill, head height, wall thickness, the rooms either side, and phase. Furniture & fixtures: sizes, height above the floor, phase and yo…